你好,我是一名自动化工程师,已经使用AutoCAD大约5年了。毫无疑问,它是现存的最不直观、问题最多、最难使用的软件套件。继续允许工程师使用这个软件绝对是不尊重的,如果我自己做这个产品,我永远不会自豪地说:“这是我做的。”令人厌恶的是,你们主导了接线图和面板设计市场,你们在这个软件上过于复杂,交付不足,这不仅让我感到沮丧,而且每次打开它都让我恶心。为什么当您更改项目内部绘图的名称时,必须单击“刷新”才能生效?绘制一个项目,移动到“插入”选项卡,选择“创建块”,然后在块上选择一个点作为插入点,你怎么能让制作块变得比这更复杂呢?但是,如果您希望该块上面有一个带注释的名称,则需要在块编辑器中重新打开该块并插入一个Tag,然后单击保存。但是等等,标签实际上并不在那里,您需要知道输入“battman”命令,找到您的块,并同步它。这个产品对欧特克的开发人员来说是一个笑话吗?想要将单元格添加到已导入的excel表中?对不起…… you just can't do that. if you set it up with 4 cells, you get four cells. and if you want to make it five, you need to create a new table. Let's edit the title block, if you have never done it before, break out the instruction manual because we are going for a ride, right-click your project, and select descriptions. change whatever you want it to say, then click ok. Then you'll need to right-click the project again and click "title block update" but wait, it doesn't just update the title block to what you changed it to, because maybe you only wanted that on one page of your project. When, in history, did you not want all the title blocks the same? OK, well you need to select what you want to update. Once you have selected that you want to update everything so the drawing is consistent and professional, let's go ahead and click "OK, Project-wide" but wait... none of the title blocks updated other than the one that you had open. Oh yeah, you forget to check "Activate each drawing to process" well ****, now we have to go reselect that we want everything updated and do it again. My favorite part, waiting for each drawing in the project to open, and process. If you have a legend table on the front page, why does it not Auto-Update when you add or remove drawings from the project. It's not even a huge thing to ask for, but forget it. Its another 5-10 minute task to just make the legend match the drawings. This software is a joke that we are forced to endure. Why not pre-set a block database with all the CAD files from Pheonix, Automation Direct, Allen Bradley, Siemens Etc? Just click import block, select a manufacturer category, etc and import it. Even a link like fusion360 has to import Dwg files from their website would be better than nothing. PLEASE, PLEASE, PLEASE for every electrical engineer that had to google how to do something that should be simple this week, PLEASE fix this Dumpster fire of software. Sincerely, Every Engineer born after 1990
显示更多